If you want woodwork that is both decorative and strong, a joiner is the professional you need to hire. But what exactly is joinery, and where do you need to use kitchen joinery in Sydney?  

Read on to find out more:

What is joinery?

Put in simple terms; joinery is the process by which you connect two or more pieces of wood. Joinery generally involves gluing, screwing, and nailing two or more wood pieces, but the entire process might seem complicated. Though the primary purpose of joinery in Northern Beaches in Sydney is to hold the wood together securely and firmly, it can also act as a decorative feature of the project where joinery is required. 

Joinery is the most crucial part of most woodworking, and it is found in furniture, windows, cabinetry, floorings, and doors, and much more. Kitchen Joinery is a specialist area of carpentry, and you will always get an exceptional joiner or cabinet maker to do the particular work, rather than hiring a good carpenter. 

Common joints in joinery:

Numerous joints are there that the joiner frequently use in joinery, and these are- 

  • Butt joints – When two pieces of wood are connected using the square end of a single piece of timber lying against the other’s side to form a right angle. Screws, nails, and dowels secure the joint. 
  • Cross-lapped joint – In this joint, you cut out a rectangular section off each piece of wood, and it fits together so that it is washed out. This acts as an interlocking joint. 
  • Dovetail joint – This type of joints connects two lengths of wood by cutting out a section off the first length burning another piece from the second length. Ensure that the first piece fits into the second piece. It seems like a jigsaw puzzle where the out portion of a block fits into another block’s in-part.  
  • Doweled joint – Here, the joiners cut small holes into each piece of wood, and they connect with the use of small dowels. You need to use glue for extra strength. 
  • Dado joint – In this case, you use a grove in one piece of wood and connect it to the second piece. You need to insert the second piece into the groove. 
  • Tongue and groove joint – In this type, you join two pieces of wood together by cutting a groove in the first piece and an edge in the second piece. The tongue or edge fits into the groove securely, but you can use glue or nails to strengthen the joint. 
  • Mitre joint – In this case, you cut each end of the pieces of wood at a 45-degree angle. To secure the joint, the joiners use screws, nails, and glue. 
  • Mortise and tenon joint – In this case, one piece of wood comes with a mortise or a recess cut into it, and the other part has a carved projection or tenon cut into it. The tenon fits into the mortise and remains secure. 

This article has indeed taught you everything necessary about kitchen joinery in Sydney.